![OKIDATA Pacemark 3410 Service Manual Download Page 123](http://html2.mh-extra.com/html/okidata/pacemark-3410/pacemark-3410_service-manual_3702262123.webp)
Auto Feed XT (Epson /
IBM)
Invalid
Valid
Epson Emulation Some
interface cables are
wired so that the XT
signal always causes
an automatic line feed.
The
Invalid
setting
eliminates this. Use
the
Valid
setting if the
system uses the XT
signal for automatic line
feed.
Serial I/F
Parity
None
Odd Even
Serial Data 7 or 8 Bits
8 Bits
7 Bits
Protocol
Ready/Busy
X-ON/X-OFF
Diagnostic Test
No
Yes
Set to Yes to run the
serial interface
diagnostic test. To
restore to full operation
power OFF the printer.
Press and hold PRINT
QUALITY and PITCH
and power ON the
printer. This will place
the printer in Menu
Mode. Then change
this setting to NO for
normal operation.
Busy Line
SSD-
SSD+ DTR
RTS
Baud Rate
19200
9600
4800
2400 1200 600 300
bps
DSR Signal
Valid
Invalid
DTR Signal
Ready on Power Up
Ready on Select
Busy Time
200 mS
1 sec
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for Pacemark 3410
