OKIDATA Pacemark 3410 Service Manual Download Page 140

Page: 140 / 249

Page: 86

Service Guide PM3410

Chapter 3 Maintenance & Disassembly

3.6.02 All Other Returns

CAUTION:

The product MUST be returned in the original packaging.

The product MUST be returned with ALL originally supplied factory items.

Be sure to secure the printhead so it will not move during shipment.

1. Locate the original packaging or order replacement packaging from Okidata.

(Refer to Appendix B)(

2. Locate the originally supplied factory items. (Refer to

Setting Up

in the Printer Handbook)

3. Make sure the printhead is secured so it will not move during shipment.

4. Pack the unit, using the materials from Step 1.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for Pacemark 3410






















































































































































































































Search results

Summary of Contents for Pacemark 3410

Reviews:

Brands by name

Popular brands

OKIDATA Pacemark 3410, Service Manual

Search results

Summary of Contents for Pacemark 3410

Reviews:

Brands by name

Popular brands