OKIDATA Pacemark 3410 Service Manual Download Page 173

Page: 173 / 249

Pin 7 of cable CN7.

NO Replace the power supply unit.

YES Replace the Program ROMs on the main logic board.

Is the problem resolved?

YES End of procedure.

NO Replace the main logic board.

Is the problem resolved?

YES End of procedure.

NO Replace the interface connector board.

Is the problem resolved?

YES End of procedure.

NO Replace the cable connected to CN6 on the main logic board.

Is the problem resolved?

YES End of procedure.

NO Contact Technical Support.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for Pacemark 3410






















































































































































































































Search results

Summary of Contents for Pacemark 3410

Reviews:

Brands by name

Popular brands

OKIDATA Pacemark 3410, Service Manual

Search results

Summary of Contents for Pacemark 3410

Reviews:

Brands by name

Popular brands