manualshive.com logo in svg

OKIDATA Pacemark 3410, Service Manual

Share
Download
OKIDATA Pacemark 3410 Service Manual Download Page 213

Page: 134

Service Guide PM3410

Chapter B Illustrated Parts Listing

 
B.1.03 Parts Ordering Information

Service Center Reference Guide

When a technician has successfully completed a Service Training Course for a product and the Dealer 
has become Service Authorized, an information package is provided to the Dealer. The Okidata Service 
Center Reference Guide outlines the following items.

Responsibilities of Okidata Service Centers

Spare parts and consumables information

Procedures for warranty repairs

Product Training, Certification, and Authorization

Product Support information

Okidata Depot information and services

Third Party Service information

Information about Okidata's Customer Information Center

Okidata Service and Support telephone numbers.

The Service Center Reference Guide contains the procedures to follow for ordering parts. Please 

read

, 

understand

, and 

follow 

these procedures. Service Authorization for a specific product 

must 

be obtained 

before a Dealer can submit warranty claims.

Direct questions regarding the Service Center Reference Guide to Okidata Dealer Service. Refer to the 
Service Center Reference Guide for information on contacting Okidata.

Placing a Parts Order

All authorized Okidata resellers may order spare parts and consumables for Okidata products. Orders are 
placed through Okidata's Logistics Department.

Please refer to your Service Center Reference Guide for details on ordering parts.

You should have the following information available 

before 

you place your order.

Okidata Dealer Authorization Number

Okidata Customer Number

Your Purchase Order Number

Okidata Part Number(s)

Use this Appendix, Okilink II, Faxable Facts, or contact Okidata Technical Support to find the correct part 
number. Refer to the Service Center Reference Guide for information on contacting Okidata.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for Pacemark 3410


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands