76
76
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Using Paper from a New Size Standard
This Printer supports the paper of the following size standards.
A series
ARCH series
ANSI series
30×42 series
MAP series
DIN series
User Defined series
The Printer's factory default setting is A series.
Check the size standard currently specified on your Printer in
Available Size
Standards (
&
. (The size standard set to On is activated.)
This section describes the procedure to add a new size standard. The following is
described taking ANSI series as an example, and the same procedure is applied
to the other size standards. For user defined series, see
Using Paper from a User
Defined Series (
&
.
(1) Set the available size standards
In
Available Size Standards (
&
, set ANSI series to On.
Note
It is not possible to set all the size standards to Off.
When the
Available Size Standards
setting is changed, the Printer restarts.
(2) Set the paper size standards
The rolls available in the ANSI series are 34 inches, 22 inches, 17 inches, and 11
inches. Set the roll you will actually use to On in
Paper Size Standards (
&
. You are recommended to set all unrequired roll widths to Off.
Note
It is not possible to set all the paper size standards in the same size standard
to Off
When the
Paper Size Standards
setting is changed, the Printer restarts.
