47
T
Replacing the Roll Paper
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
3
Knob
Release the paper flanges, and remove
the roll paper.
Loosen the paper flange knobs by turning them
in the
OPEN
direction. Remove the paper flanges
on both sides.
Note
To prevent the paper flange ends from being misaligned, do not turn the aper
flange knobs too much with excessive force.
Installing the Roll Paper
TIP
There is no difference between the right and left paper flanges. The
flanges can be installed on either side.
1
Knob
Set the paper flanges onto the roll
paper.
Insert the end of a paper flange onto the roll
paper tube. Fasten the flange by turning the
knob in the
CLOSE
direction.
Note
If a paper flange knob is too loose, the roll paper will move from side to side.
There will be a negative effect on printing. Fasten the knobs tightly.
2
Move the flange guide.
Align the flange guide with the position
appropriate for the roll paper size.
