134
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
If the density of a thin line is reduced, it may be printed as a dotted line.
In the D-SCAN format, 16 gradations are available for printing.
Specified Values (%)
Gradation
Specified Values (%)
Gradation
0 to 5
1
50 to 56
9
6 to 12
2
57 to 62
10
13 to 18
3
63 to 68
11
19 to 24
4
69 to 74
12
25 to 30
5
75 to 81
13
31 to 37
6
82 to 87
14
38 to 43
7
88 to 93
15
44 to 49
8
94 to 100
16
z
In the HP-GL format, printing is performed in white when the density is 0%.
z
In the D-SCAN format, printing is performed in white when the density is 0 to 5%.
z
Line End
The parameter specifies the line end shape for the printer's pens.
<Parameter by selecting options>
n
: Default value
n
Round
Sets the line end to round.
Butt
Sets the line end to butt.
z
The line end shape of these parameters are shown in the figures below.
Round
Butt
a
a = 1/2 of line width
z
The printing may take time when the parameter settings are NOT as follows.
Line End to Round; and
Line Join to Round
z
The Line End parameter may not be valid for the outermost line on a drawing.
z
Line Join
The parameter specifies the line join shape of the Printer's pen.
<Parameter by selecting options>
n
: Default value
n
Round
Sets the line join to round.
Mitered
Sets the line join to mitered.
z
The connection method of these parameters are shown in the figures below.
