45
T
Replacing the Roll Paper
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
When the prompt message to supply paper appears, press
Alternative
Printing
to print with:
- a paper size bigger than the requested paper; or
- a paper type different from the requested paper.
However, Alternative Print is not effective when:
- On the print mode,
Paper Supply Mode
is set to
Roll 1
,
Roll 2
,
Roll 3
,
or
Roll4
; or
- On the copy mode,
Roll Position
setting is not
Auto
.
With rolls other than user defined series, the roll paper width is displayed
as follows. (Changing the unit of length does not change the display.)
A series
A0 A1 A2 A3
ARCH series
36 in. 24 in. 18 in. 12 in.
ANSI series
34 in. 22 in. 17 in. 11 in.
30×42 series
30 in.
MAP series
707 mm (27.83 inches) 500 mm (19.69 inches)
DIN series
707 mm (27.83 inches) 500 mm (19.69 inches)
With the user defined series, the screen displays the values, specified at
the User Defined Size 1 to 4, in mm or in inches.
Examples:
234.5 mm, when the unit of length is set to mm.
12.3 in., when the unit of length is set to inches.
Note
If the paper type and the paper series are specified on the supply paper
screen, press Paper to set the paper type and the paper series before
loading the new roll.
Replacement Precautions
Caution
The roll paper is heavy. Be careful not to drop it and injure yourself.
Be careful not to drop the roll paper onto the flange guide. The flange guide
may be damaged.
The flange guide will be damaged if you drop the roll paper when the paper
flanges are installed.
Be careful not to trap your hand when opening and closing the roll paper
drawers. When a roll paper drawer is open, do not open the other roll paper
drawer. The risk of trapping your hand will increase.
