236
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
(2/2)
Command
Function
Supported
Name
Code
Simple Color
ESC * r # u|U
Sets the color mode.
Yes
Current Pattern
ESC * v # t|T
Sets the pattern type for the raster.
No
Download Pattern
ESC * c # W [pattern data]
Loads a user defined pattern.
No
Pattern Control
ESC * c # q|Q
Specifies the deletion of a user defined
pattern.
No
Pattern ID
ESC * c # g|G
Sets the ID of a user defined pattern.
No
Pattern Reference
ESC * p # r|R
Defines the paste position for the pattern.
No
Logical Operation
ESC * l # o|O
Specifies the logical calculation mode for the
raster data.
Partially (
8
)
Pattern Transparency Mode
ESC * v # o|O
Specifies transparency mode on/off for the
pattern.
No
Source Transparency Mode
ESC * v # n|N
Specifies transparency mode on/off for the
source raster.
No
(
1
) Parameter value -1 is handled as 0.
Parameter values -1 to 3 have no effect on palette information.
(
2
) Parameter values 0 to 3 have no effect on palette information.
(
3
) Partial pages in the received data are not printed.
(
4
) Parameter 4 in Set Pixel Encoding Mode is not supported.
The specifiable range in Set Number of Bit per Index is 1 to 8.
The specifiable range in Set Number of Bit per Primary is 0 to 8.
(
5
) The specifiable parameter range is 0 to 31 (2**5-1).
(
6
) Pushing and popping are not performed for the pen width.
(
7
) The only parameter value enabled for ESC*t#J is 0.
(
8
) ESC*l#O is enabled only in some logical calculations for monochrome binary raster.
Commands not included in the table result in command errors or are disregarded.
T
Command Lists
