114
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
Centering Off
Paper feed direction Cut position
Paper feed direction
Cut position
X
Y
printed image
Centering On
X
Y
a
b
a
printed image
b
a: Varies depending on the printed image size.
b: Varies depending on the printed image size.
Regardless of the printed image size, the
image is positioned in the center of the paper.
n
Paper Type
The paper type is specified, which is valid at the automatic paper supply with Paper
Supply Mode set to Continuous or Optimal.
<Parameter by selecting options>
n
: Default value
n
Not Specified
Does not specify the paper type.
Plain
Supplies plain paper.
Tracing
Supplies tracing paper.
Film
Supplies film.
n
Excess Size Tolerance (mm)
When an image size exceeds a standard size or a roll paper size, the Printer
identifies the image size as the standard size or the roll paper size on the condition
that the excess is within the defined excess size tolerance.
However, note that the part of the image exceeding the used paper size is not
printed, as the actual print area is not affected by the excess size tolerance.
<Parameter by entering numbers>
0 to 30
Default value = 2, Unit in mm
