Oki MB472w Maintenance Manual Download Page 156

Page: 156 / 224

45762101TH Rev.1

4-36

Oki Data CONFIDENTIAL

4.REPLACEMENT OF PARTS

①

⑤

④

①

②

③

4.2.17 Stacker Cover

(1)  Remove the Cover Assy Stacker. (Refer to 4.2.16)
(2)  Remove the LED Head. (Refer to 4.2.10)
(3)  Remove four screws (Black)

①

, remove the Cover-Lever

②

(4) Remove the Lever-Lock-Top

③

, Lever-Lock-Button

④

. Remove the

Spring-Lever-Top

⑤

(5) Installing is performed by the reverse procedure with removing.

(7) Remove the Cover Assy Stacker

⑥

and two Spring-Torsion-ST

⑦

⑧

(8) Installing is performed by the reverse procedure with removing.

Note!

1. Beware of not to touch the DC motor inattentively (Do not rotate moter).
2. Clamp together the screw and the FG-Film.

⑥

⑦

⑧

Summary of Contents for MB472w

































































































































































































































Search results

Summary of Contents for MB472w

Reviews:

Related manuals for MB472w

Brands by name

Popular brands

Oki MB472w, Maintenance Manual

Search results

Summary of Contents for MB472w

Reviews:

Related manuals for MB472w

Brands by name

Popular brands