background image

114

OKIFAX 5250

|

Power Outage Report

What is it?

This report automatically prints if power is interrupted. It lists
all messages lost because of the power outage.

Certain information stored in your fax machine is lost if
power is interrupted under these circumstances:

• If there is no optional memory expansion board installed.
• If there is optional memory installed, but power has been

interrupted for more than one hour.

In these cases, any documents stored in the fax machine’s
memory are erased.

These items are usually faxes in personal boxes and faxes not
printed because there was no paper in the machine.

The information in this report can help you identify and
reconstruct any documents that were lost.

What information does it provide?

• All faxes received into memory but not printed,
• The date and time the faxes were received,
• The Sender ID for each fax.
• Faxes in memory waiting to be sent, when they were

scheduled to be sent, and the intended recipient.

How to Print

This report automatically prints if power is interrupted.

How to Interpret

Refer to “What information does it provide?” for this report.

Summary of Contents for FAX 5250

















































































































































































Reviews: