background image

Maintenance > 85

3.

Note the positions of the four cartridges.

4.

Holding it by its top centre, lift the image drum, complete with its toner cartridge, up 

and out of the MFP.

5.

Put the cartridge down gently onto a piece of paper to prevent toner from marking 

your furniture and to avoid damaging the green drum surface.

6.

With the coloured toner release lever (1) to the right, pull the lever towards you. 

This will release the bond between the toner cartridge and the image drum 

cartridge.

7.

Lift the right-hand end of the cartridge and then draw the cartridge to the right to 

release the left-hand end as shown, and withdraw the toner cartridge out of the 

1. Cyan cartridge

2. Magenta cartridge

3. Yellow cartridge

4. Black cartridge

CAUTION!

The green image drum surface at the base of the cartridge is very 

delicate and light sensitive. Do not touch it and do not expose it to 

normal room light for more than 5 minutes. If the drum unit needs 

to be out of the MFP for longer than this, please wrap the cartridge 

inside a black plastic bag to keep it away from light. Never expose 

the drum to direct sunlight or very bright room lighting.

1

2

3

4

1

Summary of Contents for ES5460

































































































































Reviews: