Oki ES5460, User Manual

Page: 41 / 128

Configuring your machine.... > 41
System configuration menu
ITEM CHOICE DESCRIPTION
Pow Save Time 5
15
30
60
240
Adjusts the idling time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced to a low level required to just keep
the printer operating and ready to receive
data. When a job is sent the MFP will require
a warm-up time of up to 1 minute before
printing can begin.
Personality AUTO
EMULATION
PCL
IBM PPR III XL
EPSON FX
PS3 EMULATION
This item selects which industry standard
emulation your MFP should use. When set to
AUTO, incoming data is examined and the
correct emulation is automatically selected
each time a print job is received.
USB PS Protocol RAW
ASCII
Selects PostScript data format for USB port.
Clrable Warning ONLINE
JOB
When ONLINE, non-critical warnings, such
as requests for a different paper size, can be
cleared by pressing the ON LINE button.
When set to JOB, they are cleared when the
print job resumes.
Auto Continue ON/ OFF Determines whether or not the MFP will
automatically recover from a memory
overflow condition.
Manual Timeout OFF
30 sec
60 sec
Specifies how many seconds the MFP will
wait for paper to be fed before cancelling
the job.
Wait Timeout 5~ 40 ~300
OFF
Specifies how many seconds the MFP will
wait when received data pauses before
forcing a page eject. In PostScript Emulation
mode the job will be cancelled if timeout
occurs.
Low Toner CONTINUE
STOP
Specifies whether the MFP should continue
printing even after a low toner condition is
detected.
Jam Recovery ON /OFF Specifies whether the MFP should perform
jam recovery after a paper jam has
occurred. If ON, the MFP will attempt to
print again any pages lost due to a paper
jam once the jam has been cleared.
Error Report ON/ OFF If ON, the MFP will print error details when a
PostScript Emulation error occurs.