Oki ES2024n User Manual Download Page 412

Page: 412 / 512

ES 2024/2024e Troubleshooting • 412

Cannot configure for USB connection.

NOTE

• Windows 95 does not support USB.
• Windows 98 upgraded from Windows 95 may not support

USB.

• Windows 98 original installation and Windows Me, 2000,

NT and XP all support USB.

Possible cause

Remedy

Computer does not
support USB
interface.

Check if there is a USB controller in the Windows
device manager.

USB cable does
not meet
specifications.

Use USB cable to specification Ver.1.1.

Interface is
disabled.

Check that USB interface is set to Enable.

Configuration
procedure was not
correctly followed
or cancelled.

Configure again from the beginning.

USB cable is
disconnected or
faulty.

Reconnect or try another cable.

A USB hub is being
used.

The printer cannot be used with a USB hub.
Connect the printer and computer directly.

Summary of Contents for ES2024n

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ES2024n

Reviews:

Related manuals for ES2024n

Brands by name

Popular brands

Oki ES2024n, User Manual

Search results

Summary of Contents for ES2024n

Reviews:

Related manuals for ES2024n

Brands by name

Popular brands