7
Connecting the Cables
Connect the ADF Cable
Connect the ADF cable (attached to the documents
cover), to the
ADF
port on the scan unit.
Connect the Ethernet Cable
Connect one end of your Ethernet LAN cable to an
available port of your Ethernet hub. Connect the other
end to the
LAN
port at the back of the scan unit.
Connect the Printing Unit Cable
1. Connect one end of the USB cable (short cable) to
the printing unit.
2. Connect the other end to the
Copy
port of the
scanning unit.
Connect the Computer Cable
Connect one end of the USB cable (long cable) to the
USB
port on the scanning unit. DO NOT connect the
other end to your computer. Complete the connection
only after installing the driver.
Connect the Scanning Unit Power Adapter
1. To mount the power adapter box to the back of the
scanning unit, position the clip on the back of the
box on the scanning unit frame as shown, then
slide the box to the left until it locks in place.
2. Be sure the power switch is in the "O" position.
Connect the power adapter cable to the power
port.
IMPORTANT NOTE!
To ensure the scan function works properly,
install the Scanning Unit Driver before
connecting the USB cable to your computer.
