Windows: Software Utilities
•
305
Creating PCL Macros (Forms)
There are two basic processes to producing PCL macros:
•
A: Creating and downloading the PCL project
•
B: Test printing the macro
A: Creating and Downloading a PCL Project
Step 1: Create the Forms in Your Software Application
1.
Create the document in your software application.
2.
Click
File
→
and make sure the PCL driver is selected.
3.
Print the document to a file using the extension PRN.
Step 2: Create a New Project
1.
Open Storage Device Manager.
2.
Click
Projects
→
New Project
.
The Project dialog box opens.
3.
Click
Projects
→
Save Project
, enter the path/name for storing
the project on your hard drive or your network, then click
Save
.
Important!
Unless you are experienced with PCL macro commands, it is best
to stay with the PostScript Forms.
Important!
Remember that file names and paths are case sensitive.
Summary of Contents for ES 1624n MFP
