1 Setting up User Management
42 Setting up User Management Setting
4
Press the [PASSWORD] button.
5
Enter the password (maximum 64 letters) and then press the
[ENTER] button.
6
Press the [ENTER] button.
The menu will switch and the equipment will be ready to be used.
y
If the user information is incorrectly entered, the menu will not switch. In this case,
press the [FUNCTION CLEAR] button and then enter it again.
When the Windows Domain or LDAP authentication is used, the Entering the Depart-
ment Code screen will be displayed if the entered user information is not registered in the
equipment. In that case, the user information will be automatically registered when you
enter the department code.
