manualshive.com logo in svg

Oki C9800hdn, Configuration Manual, Page: 151 / 168

Share
Download
Oki C9800hdn Configuration Manual Download Page 151

A

A-3

Troubleshooting

Select File Server From List
(Network Setup > Service 
Setup  > PServer  Setup >

 

 Bindery  Setup)

Error. Cannot open bindery 
connection to NDS server.

Select this server through NDS setup or disable NDS and 
select it through bindery.

No NetWare file 

 

server found.

No file server was found when Fiery queried the network to 
create a list of supported servers or a list of all

 

servers.

Check cable connections and make sure the NetWare 
server is turned on.

Enter First Letters

 

of Server Name
(Network  Setup  > Service 
Setup  > PServer  Setup  >

 

 Bindery  Setup)

File server name not found. 
Try again?

No file server with those letters was found when Fiery que-
ried the network. Check the name of the NetWare file 
server, check cable connections, and make sure the Net-
Ware server is turned on.

View Server List,

 

Edit Connection 
(Network  Setup  > Service 
Setup  > PServer  Setup  >

 

 Bindery  Setup)

No file server is selected.

No file server has been added in Bindery Setup.

Add File Server
(Network  Setup  > Service 
Setup  > PServer  Setup  >

 

 Bindery  Setup)

All connections used.

 

Remove server?

You have added the maximum number of bindery servers, 
which is eight. You now have the option of disconnecting 
one of those servers, so as to add another.

After this Setup screen

This message

Means

Summary of Contents for C9800hdn









































































































































































Reviews:

No comments