manualshive.com logo in svg

Oki C5550, Maintenance Manual, Page: 22 / 313

Share
Download
Oki C5550 Maintenance Manual Download Page 22

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

22 / 

  2.  Exposure

The light emitted from the LED head is radiated onto the charged surface of the OPC 
drum. The charge of the radiated part of the OPC drum attenuates according to the 
intensity of the light, forming an electrostatic latent image on the OPC drum surface.

  3.  Development

Toner adheres to the electrostatic latent image on the drum surface, thereby turning the 
electrostatic latent image into a toner image. 

1.  The sponge roller allows the toner to stick to the development roller. 

2.  The electrostatic latent image on the OPC drum surface is turned into a visible image by 

the toner. 

-

-

-

-

-

-

-

-

-

Power

Supply

Unit

OPC drum

Paper

OPC drum

LED head

Charging roller

LED head

-

-

-

-

-

-

-

-

-

-

-

-

OPC drum

Charging roller

Sponge roller

Development roller

Summary of Contents for C5550


























































































































































































































































































































Reviews:

No comments