manualshive.com logo in svg

Oki C5550, Maintenance Manual, Page: 121 / 313

Share
Download
Oki C5550 Maintenance Manual Download Page 121

Oki  Data  CONFIDENTIAL

44158801TH  Rev.2 

121 / 

 43301501 Guide-Assy.-Eject-U

43560401~ Guide-Assy.-Eject-U

Shaft-Assy.-Eject(FD)

Guide-Eject-Upper

Shaft-Assy.-Eject(FU)

EM-30L  Class C

EM-30L  Class C

EM-30L  Class C

EM-30L  Class D

EM-30L  Class A

part Y

part X

Apply MOLYKOTE (EM-30L) in a normal quantity to the gear 

tooth flanks, shaft surfaces and flanges (6 points). 

Grease must not stick to the paper paths.

Apply MOLYKOTE (EM-30L) in a normal 

quantity to the bearings (2 points).

Apply MOLYKOTE (EM-30L) in a normal 

quantity to the post surfaces 

(parts having the shaft inserted).

Detail of part X

Detail of part Y

Grease must not stick to the hatched parts, 

which compose the paper path.

Apply MOLYKOTE (EM-30L) in a normal 

quantity to the shaft surfaces (6 points). 

Grease must not stick to the paper paths.

Apply MOLYKOTE (EM-30L) in a normal 

quantity to the tooth flanks of each gear (3 points). 

Summary of Contents for C5550


























































































































































































































































































































Reviews:

No comments