Oki B6200dn Reference Manual Download Page 110

Page: 110 / 163

106

5 Troubleshooting

116-746

Use a registered form or register the current form.
You can check the status of the registered forms in the [ESC/P User Definition List].

116-747

The paper margin value is too large for the HP-GL and HP-GL/2 valid coordinates area.
Reduce the paper margin value and print again.

116-748

No drawing data in HP-GL and HP-GL/2 print data.
Check the print data.

116-750

Cannot print banner sheet due to failure in banner sheet feeding tray.
Restore the banner sheet feeding tray to its normal status. Or, change the banner sheet feeding
tray at the control panel.

Refer to
• “System Settings” (P. 74)

116-780

E-mail attachment error in received e-mails.
Check the attachment.

Refer to
• “2.10 Printing via Electronic Mail - E-mail Printing” (P. 38)

Error code

Reason/Action

Summary of Contents for B6200dn




































































































































































Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands

Oki B6200dn, Reference Manual

Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands