manualshive.com logo in svg

Oki B4500 Series, Maintenance Manual, Page: 169 / 171

Share
Download
Oki B4500 Series Maintenance Manual Download Page 169

43502101TH  Rev.1

169 /

Oki  Data  CONFIDENTIAL

9)

EtherTalk

a) Support OS

System7.0, 7.1, 7.1.X
System7.5, 7.5.1, 7.5.2, 7.5.3, 7.5.5
MAC OS7.6, 8.X, 9

b) PAP

The PAP is an application to process the print data.

Item

Factory default Setup range

Description

Number of connected clients

Printer name

Zone name

1 client

B4300

1 client

One item by max. 
32 characters

One item by max. 
32 characters

Indicates the number of clients which can be 
connected simultaneously. Simultaneous 
connection is possible up to one client.

Indicates the printer name which can be set 
on the printer.

Indicates the zone to which the printer be-
longs.

10) NetBEUI

a) Support OS

Windows95/98
WindowsNT4.0
Windows2000

b) NetBIOS

Item

Description

Initial recognition

Flash Down Load

PJL command /response

Executes the processing of finding out the printer by the setup utility when the printer 
is connected to the network.

Provides download processing of the program for the flash ROM.

Serves as a PJL port to send and receive the PJL command.

11) OKI Original Port

The OKI Original Port provides special processing which is beyond the scope of normal menu
operation.

Item

Factory default

Setup range

Description

Host name

Work Group name

OLxxxxxx
MLxxxxxx

Print Server

1 to 15 characters

1 to 15 characters

Indicates the NetBIOS Host name.
OL: Overseas machines
ML: Japan Domestic machines
xxxxxx is the last six digits of the 
MAC address.

Indicates the NetBIOS
Work Group name.

Summary of Contents for B4500 Series












































































































































































Reviews:

No comments