Oki B4500 Series, Maintenance Manual

Page: 48 / 171

43502101TH Rev.1
48 /
Oki Data CONFIDENTIAL
3.1.3 EEPROM Initial Setting Range for Events
As for initialization of EEPROM, ranges differ the whole phenomenon.
"O" is initialized. "–" is not initialized.
Table 3-1 The Initial-Setting domain of EEPROM
User Maintenance Menu
EEPROM RESET Operation
F/W Revision check error at
the time of a power on.
CU EEPROM area mapping
Revision check error at the
time of a power on.
Brands area check error at
the time of a power on. (*1)
Engine Maintenance Menu
ENGINE RESET Operation
PU EEPROM area mapping
check error at the time of a
power on.
System Maintenance Menu
EEPROM RESET Operation
1
2
3
4
5
6
7
CU EEPROM Area PU EEPROM Area
No Event
Factory
Default
Area
User
Menu
Area
Administrator Menu/
System Maintenance
Menu Area (*3)
Engine Maintenance Menu Area
Brands
Area
F/W
Revision
Area
Drum
Counter
Page
Counter
Toner
Dot
Counter
OP
Menu
Area
(*1) The model (forcing) which operated before is for operating as another model (forcing), and a Brands check is
recognized as an error and resets change of the Brands point by the PJL command, operation at the time of
the power supply injection by new EEPROM, etc.
(*2) It restricts to the time when whose page counter is 500 or less sheets, and is reset by 0. (ENGINE RESET by
the PJL command is not this limitation.)
(*3) Although a DOT SHIFT setting menu exists in a system maintenance menu, since setting value preservation
area is arranged at PU EEPROM AREA, even when the system maintenance menu item is initialized, a DOT
SHIFT setup is not initialized. On the contrary, when PU EEPROM AREA is initialized, a DOT SHIFT setup is
also initialized.
(*4) A DOT SHIFT setup is not initialized.