Oki B4500 Series, Maintenance Manual, Page: 31 / 171

43502101TH Rev.1
31 /
Oki Data CONFIDENTIAL
2.3.12 Stacker Cover Assy
(1) Remove the upper cover assy (see 2.3.1).
(2) Remove the operator panel assy (see 2.3.3).
(3) Remove the face-up stacker assy (see 2.3.8).
(4) Remove the motor assy (see 2.3.10).
(5) Remove the reset lever R 1 .
(6) Remove the reset spring 2 from the lower base unit 3 . Remove the screw 6 , rotate the reset lever
L 4 fully in the direction of arrow A until it stops, and remove it in the direction of arrow B.
(7) Disengage the two latches from the lower base unit 3 and remove the stacker cover assy 5 .
(8) For installation, perform the removal procedure in reverse order.
Note : 1. When reinstalling the reset lever L 4, fit it onto the guide of the lower base unit
3
, turn it
in the direction of arrow C while pressing down the shaft of back up roller, and engage the
reset lever L
4
.
2.
Be careful not to touch (or rotate) the DC motor thoughtlessly. Rotating the DM motor
counterclockwise removes the eject spring. (Refer to 2.3.9.)
5
1
A
4
B
A
C
3
6
2
4