OJMAR
25
4 _ MAINTENANCE AND FAQs
4.
MAINTENANCE AND FAQs
4.1.
MAINTENANCE
Ojmar locks automatically detect low battery levels. When this occurs, the yellow LED
flashes 3 times for each opening or closure cycle performed.
Up to 9 opening and closure cycles are possible as of the time when the low battery is
detected. On the tenth cycle, the lock can only be opened (never closed). This prevents the
lock battery from being used up and the lock from being blocked.
FOLLOW THE STEPS BELOW TO REPLACE THE BATTERIES:
1.
Remove the torx screw.
2.
Open the battery cover.
3.
Remove the battery holder.
4.
Replace the four AA batteries (two on each side of the support).
5.
Insert the battery holder. The cover should fit easily. To do so, first insert the wire and then
the battery holder.
6.
Fit the cover and tighten the torx screw.
1
2
3
4
5
6
•
NOTE: The batteries should be replaced within every 3 years.
•
NOTE: The batteries should be replaced within a maximum of 2 minutes so that the lock
does not lose its configuration.
Summary of Contents for OTS ADVANCE
