Ojmar OTS ADVANCE, Quick Manual

Page: 21 / 30

OJMAR
19
3 _ OTS MANAGEMENT SOFTWARE
4.
Then pass the time set card in all the system’s locks by pressing the knob of the lock.
This operation has to be carried out immediately after reading the card.
WRITE THE TIME CHANGE KEY:
1.
Place a blank card on top of the programmer.
2.
Click on Time Change.
3.
Select the time zone in the drop-down menu.
4.
Press write card.
5.
Then pass the time change card in all the system’s locks by pressing the knob of the lock.
WRITE INITIALISATION KEY FOR FREE KEYS:
1.
Place a blank card on top of the programmer.
2.
Click on Free.
3.
Select the subgroup in the drop-down menu.
4.
Select the first lock to be initialised.
5.
Select the last lock to be initialised.
6.
Press write card.
7.
Then pass the initialisation card in all the system’s free locks by pressing the knob of the
lock consecutively, starting on the lock with the number selected in the first lock (step 3)
and ending with the number selected in the last lock (step 4).
WRITE INITIALISATION KEY FOR DEDICATED KEYS:
1.
Place a blank card on top of the programmer.
2.
Click on Dedicated.
3.
Select the subgroup in the drop-down menu.
4.
Select the first lock to be initialised.
5.
Select the last lock to be initialised.
6.
Press read card.
7.
Then pass the initialisation card in all the system’s dedicated locks by pressing the knob
of the lock consecutively, starting on the lock with the number selected in the first lock
(step 3) and ending with the number selected in the last lock (step 4).