Ojmar OTS ADVANCE, Quick Manual

Page: 22 / 30

20 OTS ADVANCE _ QUICK GUIDE _ VERSION 3.1 3 _ OTS MANAGEMENT SOFTWARE
3.5.2.
Initialisation with NFC Programmer
To carry out the initialisation of the locks with the programmer, firstly you have to load the
locks in the NFC programmer. To do so, you have to follow the steps below:
1.
Connect the NFC programmer to the PC using the supplied USB cable.
2.
Establish communication with the programmer (see Section 3.3).
3.
Go to the set up/locks menu or click on the locks icon.
4.
Click on the lock’s name icon and the locks that are entered in the software will appear.
5.
Click on the load data of locks to the NFC programmer icon.
6.
In the menu where the lock numbers appear all the locks or the ones which are to be
loaded into the programmer are selected. A maximum of 96 locks can be loaded.
7.
Click on update.
8.
If the operation has been carried out correctly an updated message will come up.