Ojmar OTS ADVANCE, Quick Manual

Page: 25 / 30

OJMAR
23
3 _ OTS MANAGEMENT SOFTWARE
1
2
List of events : This list displays the events recorded on the events key or in the Ojmar
NFC programmer. Example:
•
The lock number used.
•
Action taken on the lock.
•
User to have performed the event.
•
Key used.
•
Date of the event.
Read events : To be able to read the events of the locks, firstly the locks that are
required to read events have to be loaded into the programmer and then the events in the
locks will be read with the programmer.
The steps to carry out in order to load the locks into the programmer are as follows:
1.
Connect the NFC programmer to the PC using the supplied USB cable.
2.
Establish communication with the programmer (see Section 3.3).
3.
Go to the set up/locks menu or click on the locks icon.
4.
Click on the lock’s name icon and the locks that are entered in the software will appear.
5.
Click on the load data of locks to the NFC programmer icon.
6.
In the menu where the lock numbers appear all the locks or the ones which are to be
loaded into the programmer are selected.
7.
Click on update.
8.
If the operation has been carried out correctly an updated message will come up.
See images of Section 3.5.2.