－
38
－
Cause
Corrective Measure
◎
Passing plate is in contact with rail.
If the passing plate is in contact with the rail, vibration will be
weakened.
Adjust the position of the passing plate.
◎ ・
Rail cover and rail pinching plate are in contact.
・
Foreign matter is caught in the clearance
between the rail cover
and the rail clamping plate.
If the vibrating part and the non-vibrating fixed part are in contact,
vibration will be weakened.
・
It is necessary to correct the installation
position of the rail cover.
・
The clearance between the rail cover and the
rail clamping plate should be about 0.4 mm.
・
However, please never move the rail clamping
plate.
・
If foreign matter is caught, please remove it.
㻼㼍㼓㼑㻌㻟㻛㻠
䐤䞉
The scraper is in contact with the wall.
䞉
The rear clearance cover is in contact
with the rail or scraper.
If the vibrating part and the non-vibrating
fixed part are in contact, vibration will be
weakened.
䞉
Correct the assembling position.
Please set the clearance between the
scraper and the wall to about 0.4 mm.
If the scraper is deformed, replacement
is necessary.
䞉
Please leave clearance of about 0.4
mm for the rear clearance cover.
Scraper
Scraper
Rear clearance
Clearance
䐥䞉
Passing plate is in contact with rail.
If the passing plate is in contact with the rail,
vibration will be weakened.
䞉
Adjust the position of the passing
plate.
Passing
plate
contact
㽢
㻼㼍㼓㼑㻌㻠㻛㻠
䐥䞉
Rail cover and rail pinching plate are
in contact.
䞉
Foreign matter is caught in the
clearance
between the rail cover and the rail
clamping plate.
If the vibrating part and the non-vibrating
fixed part are in contact, vibration will be
weakened.
䞉
It is necessary to correct the
installation position of the rail cover.
䞉
The clearance between the rail cover
and the rail clamping plate should be
about 0.4 mm.
䞉
However, please never move the rail
clamping plate.
䞉
If foreign matter is caught, please
remove it.
Rail pinching
plate
(Inside)
Rail cover
(outside)
Clearance
