－
16
－
７－１．
Replacing the rail assembly
Turn OFF the power switch before starting replacement and
adjustment.
Before replacing, remove all the screws from the hopper, the
rail, and the escaper.
①
②
③
Remove the bottom front
cover.
Pull the rail out.
Loosen the rail fixing bolt.
The rail assembly of this machine can be easily replaced.
If there is any dirt or flaw on the rail groove that prevents a smooth
operation, we recommend the user clean or replace the rail. Use
the passing plate, escaper and rail assembly that correspond to the
diameter of the screws to be used.
①
Remove the bottom front cover.
②
Loosen the escaper assembly screws and pull out the escaper
assembly. Insert the accompanying Allen wrench into the left hole on
the front top cover and loosen the rail fixing bolt.
③
Pull out the rail assembly and replace it with a rail that corresponds
with the screws you will be using.
For reassembly, reverse the disassembly procedure.
After replacing the rail, adjustments are required.
Fix the rail so that it does not contact the escaper and make sure that
screws won't fall into the clearance between the escaper and rail.
