Parts adjustments and replacements
27
7.4
Replacing the rail
CAUTION:
Turn OFF the power switch before starting to replace and adjust the rail.
Before replacing, remove all the screws from the hopper, the rail, and the
escaper.
The rail of this machine can be easily replaced.
If there is any dirt or flaw on the rail groove that prevents a smooth operation, we
recommend the user clean or replace the rail.
Use the passing plate, rail and escaper that correspond to the diameter of the screws loaded.
Loosen the rail fixing bolts and pull out the rail assembly from the rear of the machine.
After replacing the rail, each part must be adjusted.
Rail fixing bolt
Loosen the rail fixing bolts and remove the
rail assembly from the rear of the machine.
