OHM CORA Series, Manual

Page: 21 / 34

FRONT LINKS
REAR LINKS
GROUNDST
ACK
SPL
AY LIN
K
GROUNDST
ACK
FRONT LINK ST
ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-A
F CORA
ARRA
Y FRAME
- We
ight 27 kg
Engineere
d and manufactured
in the UK
ST ORAG
E
FRONT LINKS
GROUNDST
ACK
SPL
AY
LIN
K
GROUNDST
ACK
FRONT LINK ST
ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-AF CORA
ARRA
Y FRAME -
We
ight 2
7 kg
Engineered and manufactured in the UK
ST ORAG
E
FRONT LINKS
GROUNDST
ACK
SPL
AY
LINK
GROUNDST
ACK
FRONT LINK ST ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-AF CORA
ARRA
Y FRAME -
We
ight 27 kg
Engineered and manufactured in the UK
ST
ORAG
E
FRONT LINKS
GROUNDST
ACK
SPL
AY
LIN
K
GROUNDST
ACK
FRONT LINK ST ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-AF CORA
ARRA
Y FRAME - We
ight 27 kg
Engineered and manufactured in the UK
ST
ORAG
E
FRONT LINKS
GROUNDST
ACK
SPL
AY
LIN
K
GROUNDST
ACK
FRONT LIN
K
ST ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-AF CORA
ARRA
Y FRAME - We
ight 27 kg
Engineered and manufactured in the UK
ST ORAG
E
FRONT LINKS
GROUNDST
ACK
SPL
AY
LIN
K
GROUNDST
ACK
FRONT LINK ST
ORAG
E
LOCK
6°
4°
2°
0°
- 2°
- 4°
- 6°
C-AF CORA
ARRA
Y FRAME -
We
ight
27
kg
Engi
nee
red and m
anufactured in the UK
ST
ORAG
E
Manchester - England
Version 7.0 01/02/2019
21
4.7. Ground Stacking the CORA Array
Some safety limitations must be considered when ground stacking the array.
When using the frame as a ground support a maximum of 8 x CORA/CORA-A array
cabinets are allowed to be set up as a ground stack.
When using CORA-S as a ground support a combination of 8 x top/sub cabinets as a
maximum are allowed to be used as a ground stack.
CORA-S columns can be constructed using up to a maximum of 6 x CORA-S in each
column.
Lay frame in the ground stacking location.
Remove the pins from the front link locking,
front link storage and the rear splay link
storage locations.
Rotate front link and splay link into the
upright position. Replace pin into the front
link locking position.
Place CORA line array cabinet onto
the front link locating the bottom
hole on the cabinet to the front
link, replace the pin through the
hole on the cabinet and the front
link. Replace pin into the front link
storage position.
Using the desired hole on the
rear splay as predicted via
the pro-A-sync software lock
into place using rear splay
pin.
Continue adding cabinets
until the desired array is
complete.
CORA/CORA-A cabinets in
ground stack format.
NB: Maximum stack is either
8 CORA or 8 CORA-A.
1
3
2
4
5