CHAPTER 4 TESTING
Valor 1000 Series Service Manual
24
Ohaus Corporation www.ohaus.com
1.
Place the test weight in the center of the Weighing Pan.
2.
Tare the balance.
3.
Move the weight to point A and record the reading.
4.
Move the weight to point B and record the reading.
5.
Move the weight to point C and record the reading.
6.
Move the weight to point D and record the reading.
7.
If the reading at point A is negative, file at points 1 and 4 AT AN ANGLE.
8.
If the reading at point B is negative, file at points 1 and 2 STRAIGHT
ACROSS.
9.
If the reading at point C is negative, file at points 2 and 3 AT AN ANGLE.
10. If the reading at point D is negative, file at points 3 and 4 STRAIGHT
ACROSS.
Note:
It is not recommended that you try to adjust more than
–5 counts if the beam
has been filed already. If the beam has not been filed previously, you can adjust
–10
counts.
Remember, when filing you are weakening the beam. File a little at a time.
Summary of Contents for Valor 1000
Page 1: ...ValorTM 1000 Series Service Manual...
Page 2: ......
