CHAPTER 3 - MAINTENANCE PROCEDURES
Valor 1000 Series Service Manual
14
Ohaus Corporation www.ohaus.com
Figure 3-4 Main PCB: Approved Model.
4. Reverse the disassembly procedure to assemble the Load cell PCB.
3.4 Removing/Replacing the Rear Display PCB
1. Disconnect the Cable connecting the Main PCB to Rear Display PCB. (See Figure 3-1.)
2. Remove 2 screws indicated in Figure 3-5, take out the display PCB
3. Position the replacement PCB, insert and tighten the screws, screws should be fixed in the slot
of the plastic ribs.
4. Connect the Rear Display PCB Cable to the Main PCB.
Figure 3-5 Rear Display PCB.
Summary of Contents for Valor 1000
Page 1: ...ValorTM 1000 Series Service Manual...
Page 2: ......
