manualshive.com logo in svg

OHAUS Adventurer Pro Grain, Instruction Manual

Share
Download
OHAUS Adventurer Pro Grain Instruction Manual Download Page 20

Adventurer Pro Grain Test Scale

EN-18

First the zero reading is taken.  Next the display shows the
first  calibration weight value.   PUT WEIGHT (blinking) is
displayed.  Place the specified calibration weight on the
pan.

After a few seconds, place the second specified calibration
weight on the pan.  PUT WEIGHT (blinking) is displayed.
After a few seconds, the calibration weight is displayed.

LINEAR DONE is momentarily displayed when calibration is
completed.

After calibration, remove weight from pan.  To leave the
menu, press 

Exit

.

To abort calibration at any time, press the 

Exit

  button.

3.7.2 Calibration Masses

Model

      Linearity

Span

 Weight Class

    Calibration Points

Calibration Points

ASTM        OIML

AVD4102N

2000g / 4000g

2000g, 3000g, 

4000g

 

1

 

 

E2

Calibration Test
Calibration test allows a check of a known calibration mass
against the last stored calibration information in the scale.

Press and hold the 

Menu-Cal

 button until MENU CALIBRATE

is displayed.

Press 

Yes

 to enter calibration.

Press 

No

 until CAL TEST is displayed.

Press 

Yes

 and follow the screen instructions.

Place the specified weight on the pan.  After a short period,
the display indicates the difference in weight from the last
calibration, and then will display the calibration weight on
the pan.  After the test, remove the calibration weight from the
pan.  To leave the menu, press 

Exit

.

Linearity Calibration (Cont.)

6 page 16 to 18.pmd

7/27/2006, 3:11 PM

18

Summary of Contents for Adventurer Pro Grain







































Reviews:

No comments

Brands by name

Popular brands

Load more brands