Adventurer Pro Grain Test Scale
EN-16
3.7 Scale Settings
Refer to Section 3.5.2 to enter and navigate the menus.
3.7.1 Calibration
Adventurer Pro Grain Test Scale offer a choice of three calibration methods: Span Calibration,
Linearity Calibration and Calibration Test
TM
.
•
Span
Span
Span
Span
Span
- Span calibration ensures that the scale reads correctly within
specifications using two weight values: zero and a weight value
between 25% and 100% of the scale’s capacity.
•
Linearity
Linearity
Linearity
Linearity
Linearity
- Linearity calibration minimizes deviation between actual and displayed
weights within the scale’s weighing range. Three weight values are
used: zero, a weight value at midpoint of the scale's weighing range,
and a weight value at or near the scale’s specified capacity.
•
Cal Test
Cal Test
Cal Test
Cal Test
Cal Test
- Calibration test allows the stored calibration data to be tested against the
current mass being used for the test.
Notes
: Calibration may be locked out to prevent unauthorized personnel from changing
calibration.
Before beginning calibration, have masses available. Masses required for calibration
are listed in the table in section 3.7.2. Default Span Calibration Points are shown in
Bold print.
6 page 16 to 18.pmd
7/27/2006, 3:11 PM
16
