OHAUS 7000 Series, Instruction Manual, Page: 34 / 134

EN 28 7000 SERIES INDICATORS
3 CONFIGURATION: TERMINAL
This chapter provides information about how to configure the T72XW terminal for the required application. It
describes access to the setup mode, where functions can be enabled, disabled, or defined by entering parameter
values in specific setup screens.
3.1 Entering Setup Mode
The configuration of the T72XW terminal is accessed by pressing the MENU key to access the OPERATOR
menu. Use the navigation keys to highlight the SETUP icon and press ENTER or press the number on the
keypad that is shown to the left of the SETUP icon .
3.2 Security
If password security has been enabled, a login screen (Figure 3-1) displays and the user must enter the correct
password in order to advance into setup. A single password of up to 6 digits can be programmed. If enabled, the
password will be prompted automatically when the setup mode is accessed. The correct password must be entered
in order to access the setup mode. (See the Security section in Chapter 2, Operation, and the Configuration
Options, Terminal, User section of this chapter for further information about password setup and security.) To
return to the
OPERATOR menu without entering any login information, press the LEFT navigation key.
Figure 3-1: Login Screen
To enter a password:
1. With the Password entry field in focus, use the numeric keys to enter the password.
2. Press the ENTER key. If the password is correct, the terminal will enter setup mode, and the setup menu will
display. If the password is not valid, the display returns to the Operator Menu.
3.3 Exiting Setup Mode
To exit the setup mode and return to the OPERATOR menu, press the LEFT arrow key until the OPERATOR
menu reappears.
If focus is inside an entry or selection box in setup, the ENTER key must be pressed to complete the selection
before the LEFT arrow key will allow exit from setup.
3.4 Setup Menu Structure
When setup is first entered, All five main branches are displayed as shown in Figure 3-2 with focus (reverse video)
shown on the SCALE branch.
Figure 3-3: Major Branches in Setup
3.4.1 Navigation
Each display of setup branches will include one branch shown in reverse video. This indicates the branch that has
“focus”. The display of each setup branch will also include a number shown to the left of it. Navigation to a specific
branch can be done two different ways.
Password entry
box