OERTLI OS 4, Service Manual

Page: 22 / 151

2021-03-23 / Rev. 10 VV016042 22
8.1.4 Trouble shooting
Error message Description Solution
Invalid or no database file se-
lected. Choose correct file. No or incorrect file has been selected. Select valid export file.
Database import failed Database could not be imported.
Wrong schema version Database has incorrect scheme ver-
sion.

Use valid database file.

Use correct version of conversion
tool.
ERROR: check for laser pedal
assignments failed Contradiction as regards laser pedal
assignments. Select valid export file (try export again
from the device).
ERROR: setting laser pedal as-
signments failed Error occurred when setting laser pe-
dal assignments to default.

Use valid database file.

Use correct version of conversion
tool.
Laser pedal assignments can-
celled
Appears after clicking on “Cancel”
button. Conversion process is
aborted.
Set pedal assignments for required sur-
geons correctly (in the ParaProg) and ex-
port database again.
ERROR: check for pedal as-
signments failed Contradiction as regards pedal as-
signments. Select valid export file (try export again
from the device).
Pedal assignments cancelled
Appears after clicking on “Cancel”
button. Conversion process is
aborted.
Set pedal assignments for required sur-
geons correctly (in the ParaProg) and ex-
port database again.
ERROR: setting pedal assign-
ments failed Error occurred when setting pedal as-
signments to default.

Use valid database file.

Use correct version of conversion
tool.
ERROR: changes not com-
pletely defined Error in the script as regards the defi-
nition of conversion data. Use correct version of conversion tool.
ERROR: database not complete The loaded database is not complete. Use valid database (try export again from
the device).
ERROR: Correction of depend-
ent parameters failed Error occurred when correcting the
parameter dependencies due to obso-
lete parameter values

Use valid database file.

Use correct version of conversion
tool.
ERROR: sorting data failed Error occurred when converting the
database. Use correct version of conversion tool.
ERROR: database export failed Database could not be exported. If error message occurs in combination
with one of the messages mentioned be-
low: Observe the solution indicated for the
messages below.
If not:

Use correct version of conversion
tool.

Target directory must not be write-
protected.
ERROR: xxxxxxxx_surgeon al-
ready exists Error occurred when exporting, as tar-
get file already exists. Delete or relocate the relevant file from the
target directory.
ERROR: xxxxxxxx_sur-
geon.edb.1.3.1 already exists Error occurred when exporting, as
backup file already exists.