EX Series Operating Manual
USB Setting
By using USB(Universal Serial Bus) of PC, you can control the power supply per one USB port.
If the PC has 2 or more USB port, you can control as many as you have.
Below procedure is for USB interface setting method.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌Press "I/O" key in other to set USB interface.
LCD Display
I/O> 1.RS232C
Or it is differ following before state.
▌F ll
i
b f
t t
RS232C RS485 USB
d TCP/IP
th
▌Following before state, appears RS232C, RS485, USB and TCP/IP on the
display. If the display is not "3
.USB
" press the cursor key until changing
to "I/O> 3.USB" on the display되도록 합니다.
LCD Display
I/O> 3.USB
▌In other to finish the I/O setting, press the "I/O" key.
LCD Display
SAVED
LCD Display
SAVED
Through above procedure, interface method is USB.
Operator must install the USB driver that we supply for free in other to programming the window
application
Note1
application.
Must use the cable that type is standard A-A Type.(Both end of cable are male type.)
Note2
- 42 -
