EX Series Operating Manual
RS485 Setting
It is possible to control up to 255 devices include remote device after connected each devices
by parallel interface method. RS485 setting procedure.
▌T
th
l
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌Press "I/O" key in other to set RS485 interface.
LCD Display
I/O> 1.RS232C
Or it is differ following before state.
▌Following before state, appears RS232C, RS485, USB and TCP/IP on the
di
l
If h di
l
i
"2
S 8
"
h
k
il
display. If the display is not "2
.RS485
" press the cursor key until
changing to "I/O> 1.RS485" on the display되도록 합니다.
LCD Display
I/O> 2.RS485
▌Press "I/O" key in other to set baud rate.
LCD Display
>br 1: 9600 bps
Or it is differ following before state.
▌Baud rate is consist of 9600, 19200, 38400, 57600, 115200 and 230400bps.
You must match between remote interface device's baud rate.
Press "I/O" key after finished to select.
LCD Display
>address no. 05
▌Choose the address number by using encoder knob.
In case of using the 2 or more devices and connecting parallel
interface, you must select a unique address for the power supply.
▌In other to finish the I/O setting, press the "I/O" key.
LCD Display
SAVED
Through above procedure, interface method is RS485.
Through above procedure, interface method is RS485.
If you order us our converter module that convert from RS485 to RS232C, we can attach it in the
power supply. I.e, even if you use the converter kind of external type, you don't need the DC
source that you supply 5V DC source for operating converter.
Note
- 40 -
