7 Preliminary
s
tep
s
18 / 60
Instruction Manual Easyfield® (GA/15000/XXXX/EN 1219 Rev01)
Connect the hand-held button (1).
Connect the netbook (2).
Connect the USB cabe with the USB FS MED isolator.
Connect the isolator with the computer.
Connect the power supply to the unit with the supplied power cable (3).
Make sure that the mains voltage is the same as the voltage specified
on the rating plate of the power supply.
☞
If you are working with a netbook, you can skip the following steps. Pro-
ceed as described in
.
1
Port for hand-held button
3
Port for external power supply
2
USB port for connection with netbook/PC/laptop
Fig. 7-1: Connect to the netbook
3
2
1
