3.9 Servomotor Replacement
1. Unplug the unit and remove the shrouds to access the inside. Unplug the servomotor from the cable assembly.
2. Unscrew the servomotor and bracket from the unit base using a Phillips screwdriver (Figure 3.16).
3.
Notice the way that the brake cable wraps around the motor tensioning pulley, as shown in Figure 3.17.
4. Insert the brake cable end into the motor tensioning pulley of the new servomotor, making sure that it wraps
correctly around the top of the pulley from the left (Figure 3.17).
5. Plug the servomotor into the cable assembly and power on the unit.
6. Press the Level + button to move the resistance through levels 1 to 20, and then push Level - to move the
resistance back down through all levels. Verify that the pulley moves through the levels and that it is in the proper
position at level 1, with the notch on the pulley oriented to “10 o’clock”. (Figure 3.17). (If it is not, contact Octane
Fitness Customer service for further assistance in making the proper adjustment.)
7. Verify that the brake cable slider is positioned at the top of its slot (toward the center of the flywheel) when the
unit is at resistance level 1 (Figure 3.18. See Brake Cable Adjustment in this section for more information.
8. Re-attach the servomotor and bracket to the unit base using a Phillips screwdriver, and zip-tie the cable to the
frame.
Q45 3.9
Summary of Contents for Q45
