Q45 2.3
Issue
Possible Cause
What to Do
“Err6”, “Err7”, “Err8”, or “Err9”
is displayed on the console,
indicating limit switch issues.
Faulty limit switch assembly
on stride motor.
Unplug the unit.
If the unit is new (that is, just out of the box),
unplug and re-plug the limit switch assembly at
the stride motor (Figure 2.30) to ensure a good
connection.
If the unit is not new and has previously been
working without displaying these errors, check
the plug-in for the limit switch assembly (Figure
2.30). If it is connected, disconnect it and plug
in a new limit switch and test. If the error is
resolved, complete the installation of the new
limit switch according to the directions in Section
III.
“Err11” is displayed on
the console, indicating a
communications issue.
Faulty wiring harness.
Unplug the machine. Unplug and re-plug
all connections to the controller board and
servomotor (Figure 2.31, older units, or Figure
2.32, newer units.).
If the issue is not resolved, you will need to
replace the wiring harness according to the
directions in Section III.
Console buttons are not
responding or are sticking.
Faulty console key.
Replace the keypad overlay according to the
directions in Section III.
Summary of Contents for Q45
