Octagon 4010, User Manual

Page: 92 / 118

Appendix A – 82
/Cc specifies the COM port c to be used. Use
/C only when /X is used. c can be 1, 2, 3 or 4.
The default is 1.
/Bb specifies the baud rate b to be used.
Use /B only when /X is used. b can be 300,
1200, 2400, 4800, 9600, 19200, 38400, 57600
or 115200. The default is 38400.
EXAMPLE 1: To program SSD1 from local drive A, enter:
DISKSAVE /FA /DSSD1
EXAMPLE 2: To program SSD1 from local subdirectory
C:\DEMO\TEST, enter:
DISKSAVE C:\DEMO\TEST /DSSD1
EXAMPLE 3: To program SSD1 from remote drive A, first
enter the following command on the 4010:
DISKSAVE /X /DSSD1
Then enter the following command on the
remote host system:
DISKSEND /FA
EXAMPLE 4: To program SSD1 from a remote subdirectory
C:\DEMO through COM2 at baud rate 9600,
first enter the following command on the
4010:
DISKSAVE /X /DSSD1 /C2 /B9600
Then enter the following command on the
remote host system:
DISKSEND C:\DEMO /B9600
EXAMPLE 5: To create a 1 MB image file for the SSD1
EPROM from local drive A, enter:
DISKSAVE /FA /DSSD1 /S1M
StockCheck.com