Octagon 4010, User Manual

Page: 71 / 118

Using Your Own DOS – 61
4. Reboot the system by typing:
RESET
Booting from SSD1 with/without a Floppy Drive
1. Create a bootable floppy disk on your PC and copy your DOS
version of COMMAND.COM, all device drivers and necessary
application files onto the floppy.
2. Copy the file DISKSEND.EXE from the 4010 utility disk to
your PC. Make sure the file is in your DOS PATH or current
directory.
The two programs, DISKSAVE and DISKSEND, transfer and
save the files on the floppy disk to SSD1. The DISKSAVE
program resides on the BIOS drive of the 4010 and the
DISKSEND program resides on the 4010 utility disk.
3. Establish a serial communications link between your PC and
the 4010.
NOTE: If you are using COM2 on your PC, you must use the
/C2 switch with DISKSEND. Refer to the DISKSEND section
in Appendix A for more information. Also, if you cannot
communicate at 38400 baud, use the /Bxxx switch on both
DISKSAVE and DISKSEND.
4. On the 4010, execute the DISKSAVE program by typing:
A>DISKSAVE /DSSD1 /X
The systems displays the following message:
Attempting connection with DISKSEND on remote
host.
StockCheck.com