EXPLORE
E6 & E7 TH
.
INSTALL & OPERATION MANUAL
6
3
Preparing the Hull
The Explore TH unit requires an additional 60mm / 2.36
” free space from the rear of the light body to allow for
the cable clearance. (See overall dimensions in the Appendix).
OceanLED recommends using a qualified installer / technician when making modifications to your vessel.
Please also consult the manufacturer for more detail on modifications and installation.
If lights are to be fitted to a conductive or wooden hull, an Isolation Kit must be used. Contact OceanLED for
additional details.
DELRIN ISOLATION KIT
Isolation of the metal parts of the Explore TH Series Light from
conductive or wooden hulls to prevent galvanic corrosion issues.
The isolation kit is easily fitted to the rear of the light fixture using
a suitable adhesive.
PART NUMBER
019914 E-TH Delrin Isolation Sleeve Kit
For the correct orientation of the light, the logo should typically face upwards and parallel with the water line
(see Appendix Section 7.6).
Depth/Spacing
Ideally mount your lights at similar depth levels to ensure matching colour consistency through the water. Deeper lights
will look duller and possibly differ in colour compared to shallower mounted units.
Spacing / Install Depth
E6/E7 TH
Recommended Spacing
2.5-3m (8-
10’)
Recommended Installation depth (From the light waterline)
300mm (12
”)
Hull Thickness
Maximum hull thickness
– 80mm (3.15”)
Hole Cut Out
Hole Cut out size - 25mm (1
”) / With Isolation Kit 32mm (1.25”)
Overall Dimensions
See overall dimension schematic
– See Appendix (Section 7)
