EXPLORE
E6 & E7 TH
.
INSTALL & OPERATION MANUAL
13
4.2 INSTALLATION OF THE DRIVER WITH THE AC POWER KIT
Additional items required not supplied by OceanLED:
•
Screws to secure the Explore AC Power Pack and DC Driver
•
Waterproof connectors/ Junction Box
•
Sufficient cable to connect the Explore AC Power Pack to power source.
•
Suitable fuse / breaker(s)
Always consult a qualified electrician when connecting OceanLED light fixtures.
Never use power tools to secure the DC Driver or Explore AC Power Pack: hand tighten only.
When connecting light units, please note that all OceanLED lights will operate within a specific voltage range.
Please check the electrical information to ensure cable gauge, fuse and breakers size follow the
recommendations.
Always mount the Explore DC Driver and AC Power Pack in a dry location, it should not sit in standing water
at any time.
Connecting the DC Driver
1. Find the appropriate location for the driver bearing in mind that the distance from the light is predetermined by
the 1.8m long light cable and cannot be extended. Ensure chosen location is near enough to connect light cable
without applying undue stress.
2. Fix Explore DC Driver into required position and secure with four screws.
3.
Connect the plug from the light into the 10 pin port on the driver.
4.
Repeat the process for the remaining drivers.
5.
Connect the drivers in chain with the Control Link Cable (see the connection diagram on the next page).
6.
Connect the Terminator in the last driver in chain.
DC Driver
(12-24V DC)
AC Power Pack
(Input: 100-240VAC, Output:
24VDC/ 6.3A, 150W, IP67 Rated)
Power Link Cable 1.5m
