manualshive.com logo in svg

Oceanic OC1, Operating Manual, Page: 91 / 180

Share
Download
Oceanic OC1 Operating Manual Download Page 91

91

ERROR (RESET DURING A DIVE)

If for any reason, the OC1 shuts Off then turns On again during 

any Dive, the graphic ERR

 

(Error) will be displayed with the Up 

Arrow icon and current Depth with FT (or M) icon (Fig. 75A).  

If this occurs, it is highly recommended that you terminate the 

dive and begin a safe ascent to the surface.

Upon surfacing, ERR will be displayed for 5 seconds (Fig. 75B) 

and operation will revert to Watch Mode.  

Any time thereafter, when access to Dive Computer Operating 

Mode is attempted from Watch Mode, only the graphic ERR will 

be displayed and operation will revert to Watch Mode.  No 

Dive Computer modes/screens will be accessible.  

If this occurs, the OC1 must be returned to the factory for evalua-

tion/service prior to any further use for diving activities.

Fig. 75A -ERROR 

(during dive)

Fig. 75B -ERROR

(after surfacing)

Summary of Contents for OC1





















































































































































































Reviews:

No comments