Oceanic OC1 Operating Manual Download Page 172

Page: 172 / 180

172

CAN BE USED AS

• Watch

• Dive Computer (Air or Nitrox) with up to 3 Transmitters

• Digital Depth Gauge/Timer with up to 3 Transmitters

• Free Dive activity

• Compass

DIVE COMPUTER PERFORMANCE

• Buhlmann ZHL-16c based PZ+, or DSAT based, algorithm

• No Deco limits closely follow PADI RDP

• Decompression in agreement with Buhlmann ZHL-16c and French MN90

• No Deco Deep Stops - Morroni, Bennett

• Deco Deep Stops (not recommended) - Blatteau, Gerth, Gutvik

• Altitude - Buhlmann, IANTD, RDP (Cross)

• Altitude corrections and O2 limits based on NOAA tables

TRANSMITTERS

• Battery and Pressure check

> every 2 minutes when asleep

> every 2 seconds when awake

• Startup

> Pressure => 120 PSI (8 BAR)

> Battery => 2.75 volts

• Shutdown

> Pressure < 50 PSI (3.5 BAR)

TMT Compatibility with Nitrox

When packaged and shipped from the factory, Oceanic TMTs are rated for use with compressed Air and Nitrox mix-

tures containing up to 99% O2 by volume and with 100% O2.

SPECIFICATIONS

Summary of Contents for OC1





















































































































































































Search results

Summary of Contents for OC1

Reviews:

Oceanic OC1, Operating Manual, Page: 172 / 180

Search results

Summary of Contents for OC1

Reviews: